EASY STRIPP - PAINT & VARNISH REMOVER
DIRECTION FOR USE
FOR WOOD & METAL SURFACE WITHOUT DILUTING
» Lightly sand the surface with little coarse sand paper for better stripping action.
» apply heavy coat of EASY STRIPP liberally by brush to all surface being stripped without thinning. The thicker the coat, the more effective the stripping action. Ready to use (without thinning) type is designed chiefly to stripp paint from wooden surface.
» Allow EASY STRIPP to remain untill the paint softened & blistered. The stripping time depends upon the type of varnish or paint used & thickness of paint film. The thicker the film the more time required for stripping action.
» Remove the swell paint film by gently scrapping with putty knife with ease.
Do not keep in prolonged contact with wood as it may damaged veneered furniture.
» Reapply stripper if finish is not completely removed & follow the step (2) (3) & (4).
» Keep container closed when not in use.
ONLY FOR METAL SURFACE WITH THINNING FOR SPRAY
» Dilute the EASY STRIPP with good quality NC thinner & spray on metal surface like car, truck, bus & home appliance like refrigerators, cupboard & fans & follow step (2) (3) & (4) as recommended above.
» Before using by spray, check the compatibility of NC thinner with EASY STRIPP & proceed.
» Do not use spray method on wooden surface as stripping action may reduces on dilution, especially for two pack wood finish.
HEALTH & SAFETY INFORMATION
Although no chemical is entirely free from hazard, these products will present moderate to low risk to health provided that good standards of industrial hygiene are observed in there storage & use.
» Handle products is area of good ventilation. Avoid inhaling since product
contains volatile organic solvents.
» Wear normal protective overall. Solvent resistance hand gloves, eye goggles are recommended. Avoid eye & skin contact.
STORAGE, HANDLING & DISPOSAL
» Store in original container is cool, dry & well ventilated place.
» Keep out of the reach of children.
» While handling avoid inhalation and skin contact. Force ventilation or fresh air mask should be used in confined spaces.
» Dispose in land filling and not in drawn or water ways.
WARRANTY
The information contained in this sheet is based on our experience and laboratory tests and true to the best of our knowledge. However no warranty, expressed or implied, arising out of the use of our product is given as we have no control over the quality of substrate used nor the application conditions and methods. Customers are advised to carry out their own test to judge the suitability of our products for the recommended applications. The information contained here in is subject to change without further notice.
