PRODUCT DESCRIPTION
WOODPOL WOOD FILLER is based on nitrocellulose medium with high quality wood filler ingredient which has excellent property to fill wood grains prior to application of top coat such as NC sanding sealer or NC lacquer.
It fills fine pores and open grains on a wooden surface and completely seals the wooden surface and
also reduces sinking of finish coat applied on wood.
PERFOFMANCE
» Provides fast drying.
» Excellent filling properties.
» Good sandability & adhesion.
APPLICATION PROCEDURE
» Wood surface must be dry and free of dust and loose particles. Sand the surface along
» Stir the content thoroughly before use to make it homogenous.
» Apply Woodpol Wood Filler using putty knife or muslin cloth in circular motion along the grains.
» Remove excess of filler immediately.
» Allow it to dry for 1–2 hours. Sand with emery paper #180 followed by #320.
» Repeat above steps if pores or grains still not filled, taking precautions of sanding between the coats.
PRECAUTIONS
While application, excess of wood filler should be removed immediately other wise waviness will appear on surface after application of top coat
APPLICATION GUIDE
| 1 | Recommended use | Interior wood applications |
| 2 | Product description | Air-drying sealer base on nitrocellulose. |
| 3 | Appearance | Transparent pale to light brown smooth paste. |
| 4 | Consistency quality NC Thinner | Ready to use but can mix with good quality NC Thinner. |
| 5 | Method of application | Ready to use but can mix with good . |
| 6 | Recoating time | By putty or muslin cloth. |
| 7 | Recommended spray ressure | 1–2 hours. |
| 8 | Packing | 500 ml, 1 Ltr, 4 Ltrs, 20 Ltrs. |
