PRODUCTS
| PRODUCT | REGULAR MATT PRODUCT CODE | CRYSTAL CLEAR PRODUCT CODE |
| Clear Sealer | 1 | 7 |
| Clear Matt | 2 | 8 |
| Clear Glossy | 3 | 9 |
| Clear Satin | 4 | 10 |
| Pigmented Matt | 5 | |
| Pigmented Glossy | 6 |
PRODUCT DESCRIPTION
WOODPOL Natural Wood finish is a premium quality acid cured coatings which offer lasting & durable finish to
wood & wood substrate with excellent water, scratch, chemical, hot beverages, stains & termite resistant properties.
Being both cosmetically & functionally superior, it maintains excellent quality and uniqueness of
wood grains & texture of wood for years.
APPLICATIONS PROCEDURE
FOR NEW WOOD
Wood article to be coated must be dry & free of dust & loose particles. Sand surface along the grains with emery paper #180.
APPLICATIONS GUIDE
| 1 | Recommended use | Interior wood applications |
| 2 | Product description | Two component acid cured clear finish |
| 3 | Mixing ratio | Base--------90 parts by volume. Hardner-----10 parts by volume. Thinner-----20 - 40 parts by volume. |
| 4 | Application Viscosity | For spraying -
---15 - 20 sec by ford cup B4 @30°c. For brushing - ---20 - 25 sec by ford cup B4 @30°c. |
| 5 | Maturation time | 30 minutes. |
| 6 | Pot life of mixture | 8 hours. |
| 7 | Recommended spray ressure | 30 - 40 PSI |
| 8 | Recommended DFT | 25 - 30 microns |
| 9 | Drying characteristics 30 c & Relative humidity below 75% | Surface dry-----20minutes. Sanding dry ----3 - 4 hours Hard dry--------Overnight. Fully Cured-----7 days for solvent &chemical |
| 10 | Recoating time | 5 - 6 hours. |
| 11 | Thinner recommended | For spraying - # 424 For brushing - # 406 |
| 12 | Covering capacity @ 25 micron DFT | 5 - 6 sq.mtrs/litre/coat by spraying. 8 - 10 sq.mtrs/litre/coat by spraying. |
| 13 | Finish | Smooth, Matt and Glossy. |
| 14 | Packing | 500 ml, 1 ltr, 4 ltrs, 20 ltrs. |
| 15 | Shelf life | 3 year in unopened conditions in original container when store in cool & dry place @ 25 ±5°C. |
» SEALER COAT
Apply one or two coat of woodpol natural finish clear sealer and allow it to dry for
minimum of 5-6 hours. Sand with emery paper #320 or 400 between application of successive coat.
» FINISH COAT
Select finish available in matt or glossy. Alternatively the two can be mix in desire
proportions for semi glossy to satin finish of desire sheen. Apply one or two coats of woodpol
natural wood finish clear matt or glossy & allow it to dry for minimum of 5-6 hours.
Sand with emery paper #320 & 400 between application of successive coat.
FOR PRE POLISHED WOOD
Sand the surface along the grain with emery paper #100 or #180 followed by
#320 or 400 to a uniform smooth surface. If staining is desired, completely remove
the old finish by using EASY STRIPP Paint & Varnish Remover. Follow step number (2) & (3) recommended above for new wood.
