PRECAUTION
» Since color of wood to be stained significantly affects the color of the finish, it is advisable to stain on small off-cut of wood of the same lot or hide portion of furniture to ensure the desired color is being achieved.
» Not to be used on surface exposed to direct sun light.
» Can be mix with melamine, NC lacquer. Never mix with polyurethane.
» Recommended on new wood & not over previously stained surfaces.
» Use rubber gloves to protect your hands from stains.
» While mixing different stains, measure the proportions carefully to produce same color or tone if mixing is to be repeated.
GENERAL INFORMATION
» Stir the content well before use.
» Recoating time may be more in case of high humidity condition and / low ambient temperature.
» Coverage varies depending on film thickness & nature of wood.
HEALTH AND SAFETY INFORMATION
» Handle products in areas of good ventilation. Avoid inhaling vapors since product contains volatile organic solvents.
» Wear normal protective overalls. Solvent resistant hand gloves, eye goggles are recommended. Avoid skin contact.
» The product is flammable and container should therefore be kept away from fire & spark or any ignition source.
STORAGE, HANDLING & DISPOSAL
» Store in original container in cool, dry & well ventilated place.
» While handling, avoid inhalation & skin contact. Force ventilation or fresh air mask should be used in confined spaces..
» Disposal in land filing & not in drain or water ways.
WARRANTY
The information contained in this sheet is based on our experience and laboratory tests and true to the best of our knowledge. However no warranty, expressed or implied, arising out of the use of our product is given as we have no control over the quality of substrate used nor the application conditions and methods. Customers are advised to carry out their own test to judge the suitability of our products for the recommended applications. The information contained here in is subject to change without further notice.
