INSTRUCTIONS
» Stir contents well before use since soft sedimentation may occur in matt & sealer finish on storage. Strain through musclin cloth.
» It is recommended to transfer WOODPOL TRANS WOOD PU finish from half filled
container (left over after use) to other smaller container to avoid air-gap in the container if not to be use immediately.
» Close container tightly after use.
» Do not mix stains.
» Recoating & Touch dry time be more in case of high humidity and/Iow room temperature.
» Coverage & dry time varies & depend on film thickness, quantity of thinner use
& nature of wood.
» The product is flammable and the container should be therefore be kept away from fire & sparks or any ignition source.
HEALTH AND SAFETY INFORMATION :
» Handle the product in areas of good ventilation. Avoid inhaling vapours since product contains volatile solvents.
» Wear normal protective overalls, Solvent resistant hand gloves, eye goggles are recommended. Avoid skin contact.
STORAGE, HANDLING & DISPOSAL :
» Store in original container in cool, dry & well ventilated place.
» While handling, avoid inhalation and skin contact. Force ventilation or fresh air mask should be used in confined areas.
» Dispose in land filling and not in drain or water ways.
WARRANTY
The information contained in this sheet is based on our experience and laboratory tests and true to the best of our knowledge. However no warranty, expressed or implied, arising out of the use of our product is given as we have no control over the quality of substrate used nor the application conditions and methods. Customers are advised to carry out their own test to judge the suitability of our products for the recommended applications. The information contained here in is subject to change without further notice.
